GCSE Chemistry & Combined Science
The short answer
The periodic table lists every element in order of atomic number, which is the number of protons. The columns are called groups and tell you how many electrons are in the outer shell. The rows are called periods and tell you how many shells the atom has. You are given a copy of the table in your exam, so the marks are not for remembering it — they are for reading it correctly.
Here is the whole thing. It looks busy, but you only ever need a small part of it at any one time, and by the end of this page you will know which part.
Every box holds one element. The big letter or pair of letters in the middle is the chemical symbol. The small number underneath is the atomic number, and the number on top is the relative atomic mass. The colours are not part of the exam table — they are here to show you the families of elements that behave in similar ways.
Scroll sideways to see the whole table
Notice two things straight away. The table is wider in the middle — that block of metals from scandium across to zinc and beyond is the transition metals, and at GCSE you only need a handful of facts about them. And there are two rows floating underneath. Those are the lanthanides and actinides, which really belong in the gap in the middle of periods six and seven. They are pulled out so the table fits on a page, and you will almost never be asked about them.
Every box carries three things: a symbol and two numbers. Get these straight and most of the rest follows.
The atomic number is the number of protons in the nucleus. It is what makes an element that element — every chlorine atom anywhere in the universe has seventeen protons, and anything with a different number is a different element. In a neutral atom the electrons balance the protons, so the atomic number also gives you the number of electrons.
The relative atomic mass tells you how heavy an average atom of that element is compared with other elements. It is an average across the isotopes, which is why it is not always a whole number.
From those two you can work out the third particle. Protons and neutrons both sit in the nucleus and both weigh roughly one unit, so:
Round the relative atomic mass to the nearest whole number first.
How many protons, electrons and neutrons does a chlorine atom have?
Atomic number is 17
protons = 17
electrons = 17
Mass 35.5 rounds to 36?
No — use the nearest
common isotope, 35
neutrons = 35 − 17 = 18
17 protons, 17 electrons, 18 neutrons
Careful with chlorine
Chlorine is the one element where the printed mass trips people up. 35.5 is an average, so there is no chlorine atom with a mass number of 35.5 and no atom with eighteen and a half neutrons. If a question asks for neutrons, it will give you a mass number such as 35 or 37, or expect you to use 35. Everywhere else on the table, rounding the printed mass to the nearest whole number works fine.
It depends who printed it. The table on this page puts the mass on top, which is what AQA and Edexcel do. OCR prints them the other way round. The next section shows all three side by side, and it is worth two minutes of your time.
So do not learn it by position. Learn it by size. The atomic number is always the smaller of the two, and it is always a whole number. If one number has a decimal point in it, that one is the mass. That rule holds on every board’s table, whichever way up the numbers are printed.
Here is the part almost every revision page leaves out, and it matters more than anything else on this page: the three English exam boards do not print the same periodic table.
AQA and Edexcel both put the relative atomic mass on top and the atomic number underneath. OCR does the opposite — atomic number on top, mass at the bottom. If you are an OCR student who learned “the big number on top is the mass”, you have it backwards, and you will give lithium seven protons.
The quickest tell in the exam
OCR prints every mass to one decimal place. Hydrogen is 1.0, carbon is 12.0, lithium is 6.9. AQA and Edexcel use whole numbers, with only chlorine and copper carrying a decimal.
So glance at a few boxes. If nearly every box has a decimal point in it, you are looking at an OCR table and the mass is the bottom number. If almost none do, the mass is on top.
| AQA | Edexcel | OCR | |
|---|---|---|---|
| Above the symbol | Relative atomic mass | Relative atomic mass | Atomic number |
| Below the symbol | Atomic number | Name, then atomic number | Name, then mass |
| Element name in the box? | No — separate list | Yes | Yes |
| Masses written as | Whole numbers | Whole numbers | One decimal place |
| Last element shown | 118, oganesson | 86, radon | 116, livermorium |
| Lanthanides and actinides | Left out | Left out | Printed in two strips |
| Group labels | 1–7 and 0 | 1–7 and 0 | 1–7 and 0, plus 1–18 |
AQA does not print element names. An AQA box holds a mass, a symbol and a number — nothing else. The names are on a separate list further into the insert. If a question gives you an element by name and you need its symbol, you have to turn the page. Know that before the exam rather than discovering it in the hall.
Edexcel’s table stops at radon. It shows nothing beyond element 86, so there is no francium, no radium and no uranium on an Edexcel sheet. If a question seems to need one of those, it is not a question about reading the table.
Nobody labels the noble gases “Group 8”. All three boards print 0. You will still see Group 8 in some textbooks and on some websites, and it is not wrong as an idea, but it is not what is on your sheet.
Finally, where the table physically sits has moved around recently. Edexcel used to print it on the back cover of the paper and now hands it out as a separate insert. OCR has gone the other way, from a separate data sheet to printing it inside the question paper. AQA has always used a separate insert. Open a recent past paper from your own board and look — it takes ten seconds and it is the last surprise you want on the day.
A group is a vertical column. Elements in the same group behave in similar ways, and that is the single most useful idea on the whole table.
The reason is electrons. The group number tells you how many electrons are in the outer shell. Sodium is in Group 1, so it has one outer electron. Chlorine is in Group 7, so it has seven. Chemistry is almost entirely about what atoms do with their outer electrons, so atoms with the same number of them react in the same way.
Scroll sideways to see the whole table
| Group | Name | Outer electrons | What it does in reactions |
|---|---|---|---|
| 1 | Alkali metals | 1 | Loses its one outer electron easily. Gets more reactive going down. |
| 2 | Alkaline earth metals | 2 | Loses two electrons. Less reactive than Group 1. |
| 3–12 | Transition metals | Varies | Hard, strong, high melting points. Coloured compounds. Often used as catalysts. |
| 7 | Halogens | 7 | Gains one electron. Gets less reactive going down. |
| 0 | Noble gases | Full | Does almost nothing. The outer shell is already full. |
Group 1 gets more reactive as you go down and Group 7 gets less reactive as you go down. Students mix these two up constantly, so it is worth understanding rather than memorising.
Going down a group, the outer shell sits further from the nucleus. A Group 1 metal wants to lose its outer electron, and an electron that is further away is easier to lose — so reactivity goes up. A Group 7 element wants to gain an electron, and an incoming electron is harder to pull in when the space it has to land in is further out — so reactivity goes down. Same cause, opposite effect, because one group gives and the other takes.
Watch out
Hydrogen sits above Group 1 but it is not an alkali metal. It is a non-metal gas. It is drawn there because it has one outer electron, nothing more. If a question asks you to name the alkali metals, start at lithium.
A period is a horizontal row. The period number tells you how many electron shells the atom has.
Sodium is in Period 3, so it has three shells. Potassium is in Period 4, so it has four. That is the whole rule, and it works for every element you will be asked about at GCSE.
Going across a period, you are filling up the same outer shell one electron at a time. That is why you start each row with a reactive metal that wants to give electrons away, pass through the middle, and finish with a noble gas whose outer shell is full. Then a new row starts because a new shell has begun.
Draw a staircase down the right-hand side of the table and you have split it in two. Metals are on the left, non-metals on the right. About four-fifths of all the elements are metals, which surprises most students.
Scroll sideways to see the whole table
Metals
Non-metals
The positive-and-negative line is the one that earns marks. Metals lose electrons, so they end up with more protons than electrons and the ion is positive. Non-metals gain electrons, so the ion is negative. A Group 1 metal forms a 1+ ion. A Group 7 non-metal forms a 1− ion. A Group 2 metal forms 2+, and a Group 6 non-metal forms 2−.
Metals lose. Non-metals gain. The group number tells you how many.
Put the two rules together and you can write the electron arrangement of any of the first twenty elements without being told anything else. You need the position only.
The one exception
Helium has two outer electrons but sits in Group 0, not Group 2. It is placed with the noble gases because its outer shell is full, and the first shell only holds two. Position beats counting here.
These are the ones worth knowing cold. Almost every electron-structure question at GCSE uses an element from this list, and being able to write the arrangement without stopping to count saves real time in the exam.
Check the bottom line of each card against the group above it. For Groups 1 to 7 the last digit of the arrangement matches the group number every single time, which is the rule doing its work — and it is why you never need to learn this list by heart.
Group 0 is the one place it does not match. Neon is 2,8 and argon is 2,8,8, so both have eight outer electrons, not zero. They are numbered 0 because a full outer shell means they form no bonds and their usual combining number is nothing. Helium is the same idea with only two, because the first shell is full at two. Some exam boards label this column Group 8 instead of Group 0 for exactly that reason, so do not be thrown if you see it written either way.
Here is something most revision pages skip, and it is worth two minutes because examiners do ask about it.
The table is arranged by atomic number, not by mass. Usually those give the same order, so you never notice. But look at these four boxes on the table above.
If the table went by mass, potassium would land in Group 0 with the noble gases and argon would land in Group 1 with the reactive metals. Argon does nothing at all; potassium catches fire on water. That ordering would be plainly wrong, and it is how chemists knew something was missing long before anyone understood why.
Mendeleev hit exactly this problem in 1869. He arranged the known elements by mass, found that a few landed in groups that did not match their behaviour, and swapped them anyway so that the chemistry came out right. He also left gaps where he thought an element was missing and predicted what it would be like. Both decisions were guesses at the time, and both turned out to be correct.
The reason only arrived decades later, once the proton was discovered. What actually sets an element’s place is its number of protons, which always increases one at a time. Mass can jump around because an element’s mass depends on its isotopes — how many neutrons its atoms happen to carry — and that varies. Potassium has more protons than argon even though its common isotope is lighter.
Atomic number never skips and never repeats. That is why it, and not mass, decides the order.
This is the big one. If you take the mass as the atomic number you will give an element the wrong number of protons and every answer after that is wrong. The fix is simple: the atomic number is always the smaller of the two, and it is always a whole number. If one of the numbers has a decimal point in it, that one is the mass.
It sits above Group 1 and has one outer electron, but it is a non-metal gas. Alkali metals start at lithium.
Group 1 does. Group 7 does the opposite. Fluorine at the top is the most reactive halogen; astatine at the bottom is the least.
The outer-electron rule works for Groups 1, 2, 3, 4, 5, 6, 7 and 0. It does not work for the block in the middle. Iron does not have eight outer electrons. If a question asks for the electron arrangement of a transition metal at GCSE, check the question again — you are usually only asked for the first twenty.
Chlorine is shown as 35.5, which is not the mass of any single chlorine atom. It is an average across the isotopes, weighted by how common each one is. Roughly three-quarters of chlorine atoms have a mass of 35 and a quarter have 37, and that mix averages out to 35.5.
The mass number of one atom is protons plus neutrons, and it is always a whole number. The relative atomic mass on the table is the average across all the isotopes, so it need not be whole. Same idea, different job.
Use the table above. Work each one out before reading the answer.
1. Magnesium has the atomic number twelve. Give its group, its period and its electron arrangement.
From the table
Mg is in Group 2, Period 3
Period 3 means three shells
Group 2 means 2 outer electrons
2, 8, 2
Check
2 + 8 + 2 = 12 ✓
Group 2, Period 3, arrangement 2,8,2
2. An element has the electron arrangement 2,8,6. Name it and say which group it is in.
Add them up to get the atomic number
2 + 8 + 6 = 16
Element 16 on the table
Sulfur
Outer shell holds 6
Group 6
Sulfur, Group 6
3. Explain why sodium and potassium react in a similar way.
Find both on the table
Na and K are both in Group 1
Group number gives outer electrons
Both have 1 outer electron
Both lose that single outer electron to form a 1+ ion, so they react in the same way
4. Which is more reactive, chlorine or bromine? Give a reason.
Both are Group 7
Cl is Period 3, Br is Period 4
Group 7 gets less reactive down
Cl is higher up
Chlorine. Its outer shell is closer to the nucleus, so it pulls in an electron more easily
5. The relative atomic mass of copper is shown as 63.5. Explain why it is not a whole number.
What the number means
It is an average, not one atom
Copper has two isotopes
Masses 63 and 65
The average across the isotopes falls between the two whole numbers, so it is 63.5
Yes. Every GCSE chemistry and combined science exam gives you a copy of the periodic table, either printed inside the question paper or on a separate data sheet. You are never asked to reproduce it from memory. The marks come from reading it correctly and using what it tells you.
The atomic number is the smaller of the two numbers, and it is always a whole number. It tells you how many protons are in the nucleus, which is also the number of electrons in a neutral atom. Do not go by position, because it varies: AQA and Edexcel print the atomic number underneath the symbol, while OCR prints it on top. Going by size works on every board.
No. AQA and Edexcel both print the relative atomic mass above the symbol with the atomic number below it, but OCR prints them the other way round, with the atomic number on top. There are other differences too: AQA puts no element names in its boxes, Edexcel’s table stops at radon, and OCR gives its masses to one decimal place and prints the lanthanides and actinides in full.
Because it is an OCR table. OCR gives every relative atomic mass to one decimal place, so hydrogen is 1.0 and carbon is 12.0. AQA and Edexcel use whole numbers and only chlorine and copper carry a decimal. This is the quickest way to tell which table you are holding, and on an OCR table the mass is the bottom number rather than the top one.
The group number tells you how many electrons are in the outer shell. Group 1 elements have one outer electron, Group 7 elements have seven, and Group 0 elements have a full outer shell. This is why elements in the same group react in similar ways. The rule does not apply to the transition metals in the middle block.
The period number tells you how many electron shells the atom has. Sodium is in Period 3, so it has three shells. Potassium is in Period 4, so it has four. Going across a period you are filling the same outer shell one electron at a time.
Read off the period number for the number of shells and the group number for the number of outer electrons. Fill the inner shells first, two in the first and eight in the next two. Then check that the electrons add up to the atomic number. Chlorine is Period 3 and Group 7, so it is 2,8,7, and 2 + 8 + 7 is 17, which matches.
Because mass sometimes puts elements in the wrong group. Argon has a relative atomic mass of 40 and potassium has 39, so by mass potassium would come first and land among the noble gases, which would be plainly wrong since potassium is a violently reactive metal. Tellurium and iodine swap in the same way. Atomic number is the number of protons, which increases one at a time and never jumps, so it always gives the right order.
A stepped line runs down the right-hand side of the table, passing to the right of boron, silicon, germanium, arsenic, antimony and tellurium. Everything left of the line is a metal and everything right of it is a non-metal. Those six elements on the line are called metalloids and behave a little like both.
No. Hydrogen is a non-metal gas. It is drawn above Group 1 because it has a single outer electron, but it is not an alkali metal and does not behave like one. If a question asks you to name the alkali metals, start at lithium.
Because it is an average across the isotopes, not the mass of one atom. Chlorine has two common isotopes, one with a mass of 35 and one with a mass of 37. Roughly three-quarters of chlorine atoms are the lighter one, and that mix averages out to 35.5.
No, it gets less reactive going down. Group 1 gets more reactive going down, which is where the confusion comes from. A Group 1 metal loses an electron and that is easier when the outer shell is further out, so reactivity rises. A Group 7 element gains an electron and that is harder when the outer shell is further out, so reactivity falls.
They are the block of metals in the middle of the table, from scandium across to zinc and the rows below. They are hard, strong, have high melting points, form coloured compounds and are often used as catalysts. At GCSE you are not expected to work out their electron arrangements from the group number.
There are 118. The first 94 occur naturally, at least in traces, and the rest have only ever been made in a laboratory. At GCSE almost every question uses one of the first 20, plus a handful of common metals such as iron, copper and zinc.
Reading the table is the easy part. Turning it into full marks on a structured question is where most students lose them. Our tutors work through your own past papers with you, so the slips we fix are the ones you are actually making.
Revising the whole subject? Our chemistry revision notes cover every topic at SL and HL, and you can also browse the rest of the blog.
Get free IB notes, exam tips and new resources in your inbox.
I am a
Teachers log in with the details IB Demystified sent them. No account yet? Please contact us.